Foredom H.30 Handpiece, General Use
Purchased in 1989, my original Foredom H.30 handpiece is still with me today. Tthis handpiece is a testament to the quality of Foredom's products - a handy handpiece that has been a true workhorse and gone through its paces.
An H.30 Handpiece (also known as the Jacobs Chuck) is one of two handpieces that we recommend and it will handle anything from the tiniest drill bit to the beefiest 1/4 inch wide bur. Activate your flex-shaft and when the shaft key is rotating, guide your handpiece to the shaft with a push and a click. Don't be afraid to use pressure!
The Foredom H.30 General Use Jacobs Chuck handpiece is solidly built and self-lubricating (it has closed ball bearing sets inside).
All of Foredom's handpieces are self guiding. Remember to tighten your accessories with each of the three indentations on the H.30 handpiece, one at a time and your handpiece will last for years.
For more information see H.30 Instructions (H30_30SJ_Inst.pdf)
ReviewsAdd Your Review
Currently there are no reviews for this product. Share your opinion with others, be the first to write a review.
Tell a Friend
Foredom Small Top Screw Mandrel, fits both handpie...Foredom Step Drill, 1.0mm for 18 gauge wireForedom Split, Tapered Mandrel, SandpaperForedom Coarse Weave Muslin (Cotton) BuffsMaking the Most of Your Flex-shaft by Karen Christ...Soldering SanctuaryForedom Step Drill, 1.4mm for 16 gauge wireForedom Step Drill, .6mm for 22 gauge wire3M WetorDry Polishing Papers, 6-Piece AssortmentForedom Step Drill, .9mm for 20 gauge wire
|Home My Account View Cart
ï¿½ 2010-2011 Cleverwerx LLC