Foredom Cylindrical Slotted Mandrel, Sandpaper 3/32” shank
Like the Cylindrical Mandrel this Sandpaper or Split Mandrel has a "split" above the reinforced base allowing the user to wind sandpaper, polishing cloth, or other abrasives around the gap but has a tapered end. The tapered shape is very effective in sanding and polishing tight spots or undercuts where filing may be difficult.
This mandrel comes in straight and tapered styles and is generally used to sand in tight spots. The straight version is good for finishing smooth surfaces while the tapered offers access to undercuts.
Maximum and recommended speeds depend on the type and size of accessory, as well as the mandrel in use. The ratings we publish for our mandrels are based on an 1" overhang with an accessory that weighs under 1 gram, and is smaller than 1/2" in diameter. As a general rule, smaller accessories and mandrels can be used at higher speeds than larger accessories and mandrels. It is a good idea to follow the recommendations that come with both the accessory and the mandrel you are using.
ReviewsAdd Your Review
Currently there are no reviews for this product. Share your opinion with others, be the first to write a review.
Tell a Friend
Foredom Small Top Screw Mandrel, fits both handpie...Foredom Step Drill, 1.0mm for 18 gauge wireForedom Split, Tapered Mandrel, SandpaperForedom Coarse Weave Muslin (Cotton) BuffsMaking the Most of Your Flex-shaft by Karen Christ...Soldering SanctuaryForedom Step Drill, 1.4mm for 16 gauge wireForedom Step Drill, .6mm for 22 gauge wire3M WetorDry Polishing Papers, 6-Piece AssortmentForedom Step Drill, .9mm for 20 gauge wire
|Home My Account View Cart
ï¿½ 2010-2011 Cleverwerx LLC