Foredom Flex Shaft Motors 1/3 hp TX motor and SXR Speed Control for Stone Setting
Offering high torque at ALL speeds, TX motors are Foredom’s most powerful flex-shaft machines with 1/3 HP. They have permanent magnet DC motors that feature the latest in flex-shaft technology. These ball bearing models utilize advanced rare earth magnets (in place of the wound fields in our universal type SR motors) that deliver more torque at the lower speed and throughout the entire speed range of 500 to 15,000 RPM, and come with standard 39" long flexible shafts and sheaths for connecting to any of Foredom's 20+ "Quick Disconnect" handpieces.
These motors are available in 115 Volt, only.
The TX is a hang-up style version of the Series TX motor. If you set stones or need to bear down on metal, wood or plastic, this is the flex-shaft for you. It's beefy, quiet, delivers strength where you need it most, and comes supplied with Foredom's standard shaft and sheath. No other flex-shaft gives you greater control of the cutting tool, drill, or bur under any load.
The SXR foot-operated control included in this combination is a solid state control in a heavy cast-iron housing for added precision and stability on the floor.
Foredom’s permanent magnet motors require the use of a TXR, SXR, or EMX control. Damage will result if the motor is connected to any other model control.
There is two year warranty on 1/3 HP Series TX Motors and Controls.
For more information see TX Motor Manual (TX_Manual.pdf)
ReviewsAdd Your Review
Currently there are no reviews for this product. Share your opinion with others, be the first to write a review.
Tell a Friend
Foredom Small Top Screw Mandrel, fits both handpie...Foredom Step Drill, 1.0mm for 18 gauge wireForedom Split, Tapered Mandrel, SandpaperMaking the Most of Your Flex-shaft by Karen Christ...Foredom 1/6 HP Series SR Flex-shaft Maintenance Ki...Foredom Coarse Weave Muslin (Cotton) BuffsSoldering Sanctuary3M WetorDry Polishing Papers, 6-Piece AssortmentForedom Step Drill, 1.4mm for 16 gauge wireForedom Step Drill, .9mm for 20 gauge wire
|Home My Account View Cart Logout