Are you ready? Got those creative juices flowing? We know you've taken lots of classes and workshops and are ready to get moving. You want to fabricate your art, to make a space of your own and work. We get that. Breathe. Relax. We've taken out the guesswork. So here is the full kit for you, because we understand.

The COMPLETE Cleverwerx Flex-shaft Performance and Versatility Kit has EVERYTHING you need to get working on all your daily tasks at the bench. Informed by years of experience, Karen has hand-selected every tool with care to maximize Performance and Versatility. And each tool and accessory comes with Step-by-Step instructions maximizing your time at the bench and allowing you to flow.

Your Cleverwerx COMPLETE Performance & Versatility Kit Includes:

• Foredom 1/6 HP M.SR.SCT reversible motor - to honor both lefties and righties
• Ergonomic, heavy-metal SCT Foot Control for stability and precision
• H.20 Quick Change Handpiece for the 3/32" mandrels and H.30 Jacobs Chuck (also known as #30 General) Handpiece for beefy burs
• An ergonomic chuck key for your H.30 Jacobs Chuck handpiece
• The Book: Making the Most of Your Flex-shaft by Karen Christians, so you can learn about many of the accessories you see in the catalogs.
• 6 Step Drills that can be used in both handpieces calibrated for round wire from 22 gauge to 12 gauge
• Ten 3/32" Small Top Screw Mandrels 
• Two Split Mandrels, one cylindrical and one tapered for sandpapers and polishing papers
• Three Polishing Compounds, Tripoli (Cutting), White Diamond Rouge (pre-polishing), and Red Rouge (final polishing)
• Three cotton buffs for each of your polishing compounds
• Satin Finisher (Fine finish) pre-mounted with 3/32" Mandrel for great matte finishes
• Six piece assortment of 3M WetorDry Polishing Papers - 1 , 2, 3, 9, 15 and 30 micron sheets
• 3M Radial Bristle Discs - 38 piece full assortment
• Carbide Cone Shaped Bur for evenly enlarging a drilled hole for the H.30 handpiece
• Carbide Cylinder Square Bur for removing metal for the H.30 handpiece
• Carbide Inverted Cone Bur for cleaning up solder for the H.30 handpiece
• Setting Burs for 3mm, 4mm and 5 mm stones - 3/32"
• Assortment of 120 - 1000 grit  3M WetorDry Sandpaper - 2 of each grit, 12 sheets total
• Shaped Dressing Stone for rubberized and ceramic wheels
• Ten Pack CW Polishing Wheel Assortment – ceramic
• Separating Discs - little cutoff wheels that are hardy taskmasters
• Foredom Safety Kit
• Flex-shaft Maintenance Kit
• Foredom Double-ended Screwdriver for your mandrels and flex-shaft maintenance
• Rotating Bur and Tool Holder to keep it all tidy

See handy Tips, Tricks and Advice on the Flex-shaft

For more information see
M.SR-SCT Parts (M.SR-SCT Parts.pdf) 
SR Motor Manual (SR_Manual.pdf)